Design House 510297 Installationsanleitung PDF herunterladen

BRISTOL FLUSH MOUNT CEILING FIXTURE

ASSEMBLY/INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

All electrical connections must be in accordance with local and National Electrical Code

(N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the

services of a qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

missing by referencing the illustration.

WARNING: Risk of Fire. Min 90ºC supply conductors. Consult a qualified electrician to

ensure correct installation

Turn off the main power at the circuit breaker before installing the fixture in order to

prevent possible shock.

ASSEMBLY AND INSTALLATION

1. Before installing, preset the NIPPLE length:

a) Thread the HEX NUT onto the NIPPLE, and screw the NIPPLE into the COUPLING

on the CANOPY a minimum of four turns.

b) Place the center holes of the GLASS SHADE over the NIPPLE and adjust the NIPPLE

so that it protrudes out of the CAP 1/4”. Remove the GLASS SHADE & CAP and secure

the NIPPLE in place by tightening the HEX NUT.

2. Pull the SUPPLY WIRES and the SUPPLY GROUND WIRE out from the JUNCTION

BOX and attach the MOUNTING STRAP to the JUNCTION BOX using the slotted holes

on the MOUNTING STRAP and the MOUNTING SCREWS provided.

3. Thread the FIXTURE SCREWS two full turns into the appropriate threaded holes in the

MOUNTING STRAP. (Check the MOUNTING STRAP against the fixture KEY HOLE

SLOTS to ensure proper fit.)

4. Make the wiring connection: Attach the FIXTURE GROUND WIRE to the SUPPLY

GROUND WIRE. Attach both to the MOUNTING STRAP with the GREEN GROUND

SCREW. Connect the BLACK SUPPLY WIRE to the BLACK FIXTURE WIRE and

WHITE SUPPLY WIRE to the WHITE FIXTURE WIRE with WIRE NUTS.

ASSEMBLY AND INSTALLATION

(CONT.)

5. Carefully tuck all wiring back into the JUNCTION BOX. Lift the CANOPY over the

JUNCTION BOX, positioning the FIXTURE SCREWS heads through the large openings

of the KEY HOLE SLOTS. Rotate the CANOPY until the FIXTURE SCREW heads are

seated at the small ends of the KEY HOLE SLOTS, secure them with a screwdriver.

6. Install the bulbs (sold separately). Risk of fire, Use (2) MAX 60W Type A lamps. DO

NOT EXCEED THE MAXIMUM WATTAGE.

7. Place the center hole of the GLASS SHADE over the NIPPLE and secure it with a HEX

NUT. Pass the CAP over NIPPLE and secure it with FINIAL. Restore electric power to

installation point.

# 510297, #504399

Customer Service

1-800-558-8700

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN.

Customer Service 1

Inhaltsverzeichnis

Seite 1 - Customer Service

BRISTOL FLUSH MOUNT CEILING FIXTUREASSEMBLY/INSTALLATION INSTRUCTIONS Please read carefully and save these instructions, as you may need them at a lat

Kommentare zu diesen Handbüchern

Keine Kommentare

Design House 510297 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Design House 510297 herunter. Design House 510297 Installation Guide Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Design House 510297